4WD Builds Planned Around How You Actually Use The Vehicle
Suspension, bar work, wheels, tyres, GVM upgrades, trays, canopies and touring setups. Planned, supplied and fitted in house at our Western Sydney workshop. Tell us where you're taking the vehicle and we'll tell you what it needs to get there.
We Start With The Trip, Not The Parts List
Most 4WDs get built one purchase at a time. A bar here, springs there, a canopy six months later. Every part is fine on its own, but nothing was chosen to work with anything else, and the vehicle never quite drives the way it should.
We work the other way around. The first question is how you're going to use it. Weekends away with the family and six weeks heading north are two very different vehicles, even when both people walk in asking about the same part. Once that's clear, the weight sits where it should, the gear works as one system, and the budget goes into the things that genuinely change how the vehicle performs.
Whether you're starting from a brand new ute or adding to something you've had for years, Solve Offroad can plan the whole build, stage it to your budget, and fit it at our Glendenning workshop.
What We Do
Call (02) 9677 0434-
Suspension Upgrades
EnquireCustom valved FOX suspension, plus Tough Dog, Dobinsons and other quality brands, specced to the weight you actually carry loaded.
-
Bullbars & Frontal Protection
EnquireFull size traditional hooped bars through to stealth style bumper replacements, with rock sliders and underbody protection to match.
-
GVM Upgrades
EnquireAuthorised installers of certified GVM upgrades for a number of brands. We manage the whole process for you, engineering included.
-
Wheels & Tyres
EnquireA wide range of the most popular brands, balanced and aligned on the latest equipment for maximum tyre wear and comfort.
-
12V & Dual Battery Systems
EnquireREDARC, Enerdrive and more. Whether you need a battery and a few parts or a complete power solution, the team can sort it.
-
Trays, Canopies & Camping
EnquireTrays, canopies, rooftop tents and canopy campers, set up so sleeping, storage and load all work together on the road.
Bad Combinations, Not Bad Parts
The builds that disappoint people are rarely full of bad products. They're full of good products that were never planned to work together.
The three we see most often are gear collected over time with nobody checking the whole picture, springs rated for a vehicle lighter than the one it turned into, and one premium purchase that ate the budget before the build was finished.
None of those are product problems. They're planning problems, and they cost far more to unwind later than they would have to get right at the start. If you're part way into a build and something isn't sitting right, bring it in as it is and we'll give you a straight read on what stays, what's holding it back, and the order to sort it in.
What Our Customers Say
Get Your Build Started-
Blake F.
Professionalism, attention to detail and a customer first attitude from the first phone call to driving away in a fully kitted Next Gen Ranger. They coordinated everything with the dealership, so the whole process was hassle free.
-
Adrian S.
The best and most trustworthy offroad specialist in Sydney. Great impartial advice and fantastic customer service. Still the only place he'd trust his truck to, even after the move put them 45 minutes away.
-
Kieran W.
Had a long list of mods for his Jeep Wrangler before a lap of Australia. Most shops couldn't help in the timeframe he needed. Solve stepped up and got the build done.
-
Jamie M.
Walked in as a complete beginner, which is usually where someone makes a quick buck. Instead Nick talked him through the whole process properly.
-
Gary M.
Careful with who he trusts after being burnt before. From the front desk to the workshop, the team couldn't have been more helpful and gave him three different options.
-
Nik F.
Excellent communication, excellent workmanship and competitive pricing. The team take the time to do the job properly rather than rushing it to make more money.
Who We Are
Solve Offroad is Australian owned and operated, started by two mates, Nick Finch and Ben Napier, who met through four wheel driving and offroad racing. The mantra hasn't changed since: only the best quality work and products.
From a set of tyres through to bull bars, full suspension kits and complete custom builds, everything is planned and fitted by our own team at Glendenning. We work with brands that have proven themselves on quality and reliability, including FOX, Tough Dog, Dobinsons, AFN, PHAT Bars, WARN, REDARC, BFGoodrich and Alu-Cab.
We're 4WDers ourselves, so we take pride in everything we do. We go the extra mile, so you can go the extra thousand.
What Happens From Here
Start With Step One-
1. Tell Us How You Use It
A quick conversation about where you travel, what you carry and what you want the vehicle to do. This is the part that shapes everything after it.
-
2. We Spec The Build
A setup that works as one system, with weight and payload checked, and a straight answer on what to do first and what can wait.
-
3. Quote And Book In
A clear quote with no surprises, then a workshop date that suits you. Staged builds can be booked across multiple visits.
-
4. Fitted And Backed
Everything installed by our own team at Glendenning, set up properly and backed afterwards. One workshop responsible for the whole build.